Home
 
Download
 
Language
 
Search
 
About us Why Choose GET Recycling solutions Projects Contact us
Film high-speed friction washer
   

 Introduction of friction washer
Friction Washer is used to wash highly contaminated film flakes. They are used for discharging treated material mixed with water from a wet grinder. This also can be used in special cases where the friction washer can be installed in front of or after washing tank.

The friction washer consists of a double-walled trough with a fast running paddle rotor to dewater and clean plastic materials (film flakes, granules and similar materials).

The plastic materials with water are fed at the inlet of the trough. The material is washed while being transported to the outlet of the trough. Fines and water are thrown through the screen to the outside while the friction of the paddle rotor cleans the materials.

The centrifuged drain is discharged at the bottom of the trough. The trough is equipped with a removable screen with a stainless screen. A rinsing device ensures the automatic cleaning of the screen and of the inner housing.



Technical Data

Technical Data

  Model   FW8030
  Capacity(for LDPE)   1000kg/h
  Dimension(L*W*H)   3753mm*2301mm*2730mm
  Motor Speed   960rpm
  Motor power   75kw
  Rotating speed   960rpm
  Dia. of screen   800mm
  Dia. of rotator   600mm
  Others   Motor drive
  V-Belt transmission
  Protection cover for V-belts for safety

*Please contact us for more models information

Single machines
 
Label remover
Sink float tank
Cyclone separator
Zig-zags
Machnical dryer
Film high-speed friction washer
Squeezer
Contact us
 
JIANGSU  GET RECYCLING TECHNOLOGY CO,.LTD.


Add: No.1, Fengqi Road, Wuxi City, Jiangsu, China


Fax:+86051083953969   


Email: info@get-recycling.com


www.GET-recycling.com



Message
 
Title
Contents
 
Copyright 2016 GET All Rights Reserved   Home Careers Legal Sitemap